The type PS Powder Sampler is for material ranging from microscopic powders to large granules and pellets, or heavy viscosity liquids with solid suspensions.
The type PT industrial sampler is primarily used for granules and pellets and is designed to collect accurate samples when mounted on positive or negative, vertical or horizontal pneumatic conveying systems or, gravity chutes.
The type HD-PP industrial sampler is used for free-flowing materials ranging from microscopic powders to large granules & pellets and heavy viscosity liquids with acid suspensions. It is suitable for the collection of accurate samples from gravity or pneumatic conveying systems (positive or negative, dense or dilute phase) and can be mounted in vertical or horizontal lines, spouts or chutes.
he Mid Belt Rotating Scoop industrial sampler is used to sample the contents of a moving conveyor belt in one pass at pre determined intervals.
Operationally, the InterSystems Mid Belt RS, rotating scoop sampler is designed to handle a variety of materials sized from dust to 100mm and provides a clean sweep of the required belt sample directing it through a gravity chute to the collection system.
The type HD-PRT industrial sampler is used for collecting samples from a wide range of materials. Suitable for fines with small or large particles it also works with abrasive products and provides representative and repeatable samples.
The Cross Cut type of industrial samplers is acknowledged as the most truly representative method of automatic sampling for free-flowing segregated materials, including granules, powders and pellets.
The type LF industrial liquid sampler is used for sampling a wide viscosity range of liquids, from pipelines and tanks and is mounted as required through a standard flange arrangement.
To complement the range of InterSystems, industrial and powder samplers offered by the Wrights Dowson Group, a sample collection system (SCS) also known as the Carousel enables separate samples to be collected automatically at or near the sampling point until required. Included in the controller is an over-ride feature which allows manual operation if desired.